[New Version] Download Latest Cisco 400-101 Dumps PDF Training Materials And Youtube

2017 latest Cisco CCIE 400-101 dumps exam training resources free update at lead4pass. Lead4pass offers best Cisco CCIE 400-101 dumps pdf training materials and study guides. https://www.leads4pass.com/400-101.html dumps pdf practice files. High quality Cisco CCIE 400-101 dumps exam questions and answers, 100% success and guarantee to pass Cisco 400-101 exam test easily at first attempt.

Download Latest Cisco 400-101 Dumps PDF From Google Drive: https://drive.google.com/open?id=0B_7qiYkH83VRQ1BCdmJuZzdZN0U

Download Latest Cisco 400-251 Dumps PDF From Google Drive: https://drive.google.com/open?id=0B_7qiYkH83VRMmxoZk8xNUNsVHM

QUESTION 1
External EIGRP route exchange on routers R1 and R2 was failing because the routers had duplicate router IDs. You changed the eigrp router-id command on R1, but the problem persists. Which additional action must you take to enable the routers to exchange routes?
A. Change the corresponding loopback address.
B. Change the router ID on R2.
C. Reset the EIGRP neighbor relationship.
D. Clear the EIGRP process.
Correct Answer: D

QUESTION 2
Which statement about the RPF interface in a BIDIR-PIM network is true?
A. In a BIDIR-PIM network, the RPF interface is always the interface that is used to reach the PIM rendezvous point.
B. In a BIDIR-PIM network, the RPF interface can be the interface that is used to reach the PIM rendezvous point or the interface that is used to reach the source.
C. In a BIDIR-PIM network, the RPF interface is always the interface that is used to reach the source.
D. There is no RPF interface concept in BIDIR-PIM networks.
Correct Answer: A

QUESTION 3
Which two statements are true about IS-IS? (Choose two.) 400-101 dumps
A. IS-IS DIS election is nondeterministic.
B. IS-IS SPF calculation is performed in three phases.
C. IS-IS works over the data link layer, which does not provide for fragmentation and reassembly.
D. IS-IS can never be routed beyond the immediate next hop.
Correct Answer: CD

QUESTION 4
Refer to the exhibit.

Which two actions can you take to enable CE-1 at site A to access the Internet? 400-101 pdf (Choose two.)
A. Create a default route for site A on PE-1 with the next hop set to the PE-2 interface to the Internet.
B. Originate a default route in site B with the next hop set to the PE-2 Internet interface, and import the default route into site A.
C. Create a default route on CE-1 with the next hop set to the PE-1 upstream interface.
D. Originate a default route in site A with the next hop set to the PE-2 interface to CE-1.
E. Create a static default route on CE-1 with the next hop set to the PE-2 interface to the Internet.
Correct Answer: AB

QUESTION 5
Which two statements about the BGP community attribute are true? (Choose two.)
A. Routers send the community attribute to all BGP neighbors automatically.
B. A router can change a received community attribute before advertising it to peers.
C. It is a well-known, discretionary BGP attribute.
D. It is an optional transitive BGP attribute.
E. A prefix can support only one community attribute.
Correct Answer: BD

QUESTION 6
What is the cause of ignores and overruns on an interface, when the overall traffic rate of the interface is low?
A. a hardware failure of the interface
B. a software bug
C. a bad cable
D. microbursts of traffic
Correct Answer: D

QUESTION 7
Which option describes a limitation of Embedded Packet Capture? 400-101 dumps
A. It can capture data only on physical interfaces and subinterfaces.
B. It can store only packet data.
C. It can capture multicast packets only on ingress.
D. It can capture multicast packets only on egress.
Correct Answer: C

QUESTION 8
Which two mechanisms can be used to eliminate Cisco Express Forwarding polarization? (Choose two.)
A. alternating cost links
B. the unique-ID/universal-ID algorithm
C. Cisco Express Forwarding antipolarization
D. different hashing inputs at each layer of the network
Correct Answer: B,D

QUESTION 9
Which two mechanisms provide Cisco IOS XE Software with control plane and data plane separation? (Choose two.)
A. Forwarding and Feature Manager
B. Forwarding Engine Driver
C. Forwarding Performance Management
D. Forwarding Information Base
Correct Answer: A,B

QUESTION 10
Which option describes a limitation of Embedded Packet Capture? 400-101 pdf
A. It can capture data only on physical interfaces and subinterfaces.
B. It can store only packet data.
C. It can capture multicast packets only on ingress.
D. It can capture multicast packets only on egress.
Correct Answer: C

QUESTION 11
What is the most efficient way to confirm whether microbursts of traffic are occurring?
A. Monitor the output traffic rate using the show interface command.
B. Monitor the output traffic rate using the show controllers command.
C. Check the CPU utilization of the router.
D. Sniff the traffic and plot the packet rate over time.
Correct Answer: D

QUESTION 12
Which option is the most effective action to avoid packet loss due to microbursts?
A. Implement larger buffers.
B. Install a faster CPU.
C. Install a faster network interface.
D. Configure a larger tx-ring size.
Correct Answer: A

QUESTION 13
Which two statements are true about unicast RPF? (Choose two.)
A. Unicast RPF requires CEF to be enabled.
B. Unicast RPF strict mode works better with multihomed networks.
C. Unicast RPF strict mode supports symmetric paths.
D. Unicast RPF strict mode supports asymmetric paths.
E. CEF is optional with Unicast RPF, but when CEF is enabled it provides better performance.
Correct Answer: AC

QUESTION 14
According to RFC 4577, OSPF for BGP/MPLS IP VPNs, when must the down bit be set?
A. when an OSPF route is distributed from the PE to the CE, for Type 3 LSAs
B. when an OSPF route is distributed from the PE to the CE, for Type 5 LSAs
C. when an OSPF route is distributed from the PE to the CE, for Type 3 and Type 5 LSAs
D. when an OSPF route is distributed from the PE to the CE, for all types of LSAs
Correct Answer: C

QUESTION 15
Which two statements about the max-age time in IS-IS are true? 400-101 dumps (Choose two.)
A. The IS-IS max-age time is 20 minutes by default.
B. The IS-IS max-age time is 60 minutes by default.
C. The IS-IS max-age time increments from zero to max-age.
D. The IS-IS max-age time decrements from max-age to zero.
Correct Answer: AD

Read more: https://www.leads4pass.com/400-101.html dumps exam training materials free download.